What is Ankor Wax?

Ankor Wax is a complete, long-term, rust-proofing treatment particularly suitable for cars, commercial vehicles, agricultural equipment, boats and marine equipment. When sprayed onto metal surfaces Ankor Wax penetrates every nook and cranny and chemically bonds to metal surfaces providing a tough, long-lasting adherent barrier that prevents the corrosive action of road salt, water, sea spray and acid rain.  After application, Ankor Wax cures to a tack free condition providing a layer of tough, pliable, bonded rustproofing material. This coating is tenacious and tough, it resists abrasion from road debris and other mechanical damage and will not crack, chip, peel or flake. The coating also remains sound and intact in all climates. Ankor wax dries clear and is clean to use requiring little or no clean up after application.

How is Ankor Wax used?

Ankor Wax is recommended for all long-term rust proofing. It is particularly suitable for protecting vehicles to be stored in the open air for export. This product is also highly recommended for protecting agricultural equipment stored long term indoors or in the open. Ankor Wax is most easily applied by air-less or low pressure spray equipment and special wands may be used to coat the insides of doors, panel and chassis members, however, application can be made with a brush if necessary. The product should be applied to the point of saturating the surface without dripping and this results in the correct coating thickness. Overspraying is not normally a problem because Ankor Wax is not harmful to painted surfaces or plastic vehicle components. Surface preparation is not critical but loose scale or rust should be removed. Application can be made over light surface rust or dirt and over previous intact undercoating. Ankor Wax can be removed if and where necessary using commercially available solvents such as Paraffin.

Why is Ankor Wax different?

Not only does Ankor Wax penetrate and inhibit rust, it seals and protects from further damage. See the manufacturers description below.  In addition, unlike other products, Ankor Wax is clean, clear and very easy to use. You can also apply to bare metal, surface rust, oxidised paint or freshly painted surfaces. Also, if you were to apply Ankor Wax to the upper side of a floorpan for example, it will not effect your ability to glue a new set of carpets to the pan.  Ankor wax also allows you to choose the finish you want, whether it be a matt, semi-gloss or gloss. Once hardened, it can be buffed to a gloss finish if required.